REVIEW OF THE AVATAR DC.111 ASHU: PURPOSE, DESIGN, APPLICATION.
WHAT IS STUN GUN AVATAR DK.111
ELECTROSHOCK DEVICE AVATAR DK.111
Remote-contact stun gun for self-defense
STUN GUN AVATAR DK.111 is a remote–contact stun gun for self-defense against offenders and aggressive animals. The 2021 model has a modern design and reliable construction, which ensures maximum efficiency and ease of operation.
Manufacturer: OBERON-ALFA, Russian manufacturer of non-lethal self-defense equipment, police special equipment, protection systems for specially protected objects and other individual engineering projects (see BLOG. PROJECTS). The company’s office and production facilities are located in Moscow. The address of the showroom: Moscow, highway Enthusiasts, 56/1.
STUN GUN AVATAR DK.111 is a modern and safe electroshock weapon.
The stun gun AVATAR belongs to Class 1 in accordance with GOST R 50940–96 “Electroshock devices. General technical conditions” and has the highest permitted characteristics:
- Output voltage on the combat electrodes, kV — 90;
- The power of influence, W — 3;
The device is certified and has passed medical and biological tests confirming its safety for the life and health of the affected object.
Before shipment, the stun gun undergoes pre-sale preparation: the battery is charged and the operation of the electric shock arrester is checked. The buyer receives a fully ready-to-use device.
In accordance with the law “On Weapons” №150-FZ, electroshock devices belong to civilian weapons and are subject to accounting. For the buyer, this does not create problems: you only need to show your passport when buying.
The passport details of the buyer will be entered in the weapons book. This data is stored by the seller. You don’t need to get a license, register weapons, and so on.
WHAT YOU NEED TO KNOW ABOUT THE STUN GUN AVATAR DK.111
AVATAR stun gun is the best choice of self–defense weapons for daily use. The weight of the device (only 210 grams) and its small size (15.1 x 5.1 x 3.3 cm) allow you to carry it with you in a bag or clothing pocket. AVATAR has a curved shape, which provides convenience of contact and remote use.
To transmit an electric discharge to the target, the stun gun has pointed electrodes with a length of 8 mm. This is enough to apply the device through thick or thick winter clothing, and fix the electrodes on the object to avoid slipping.
The distance between the working electrodes is the maximum in accordance with the law is 40 mm. The greater the distance between the electrodes, the more effective the impact on the target.
The AVATAR stun gun has a powerful built-in lithium polymer battery (11.1V / 600 mAh), designed for the entire service life of the product. The same battery is used in ZEUS electric shock batons manufactured by OBERON-ALFA CJSC. But while the everyday carrying of batons is less convenient because of their size, the compact AVATAR stun gun does not take up much space and does not attract the attention of passers-by if you hold it in your hand.
The battery of the STUN GUN AVATAR DK.111is discharged by only 10% per month in storage mode, so if the stun gun is not used regularly, it is recommended to recharge the battery once every four months. The taser has an LED indicator of the battery level: when the device is removed from the fuse, the indicator lights up green or red. The red glow means that the taser needs to be charged.
The charger (memory) ZS-11.1–600 is included as standard in the STUN GUN AVATAR DK.111. The stun gun is allowed to charge only the memory included in the kit. The battery is charged quickly (the charge time of a fully discharged battery is about 40 minutes). Even if you put the stun gun on charge before leaving the house, it won’t take much time.
You can always be sure of the reliability and operability of your stun gun.
HOW TO CHARGE THE BATTERY
1. Turn the safety on;
2. Remove the plug of the charging connector. The silicone plug is attached to the ASH and will not be lost during operation.
3. Plug the charger into the network;
4. Carefully connect the charger to the electric shock device without exerting excessive force to the charging connector;
The charger has an indicator (red/green) that informs about the end of the battery charge.
5. After the end of the charge, install the plug in the connector. The plug fits snugly into the charging connector. Make sure that the plug is installed to the end and is adjacent to the body of the device.
Operation of the stun gun without an installed plug is prohibited. The plug performs the function of high-voltage insulation.
If the charger is connected to the network in the reverse order (first insert the connector into the stun gun, and then turn on the charger to the network), the indicator will flash, incorrectly displaying the battery charge level.
STUN GUN AVATAR DK.111: DESIGN AND OPERATION OF THE DEVICE
The Avatar stun gun has a modern ergonomic design. All controls are located on the top of the device under the thumb. The location of the buttons is as convenient as possible for using the stun gun contact and remotely, the shocker is suitable for right-handed and left-handed people (it has a symmetrical body).
STUN GUN AVATAR DK.111 has a comfortable curved shape, fits well in the hand. This form is optimal for aiming when shooting from a remote cartridge.
There are decorative pads on the sides of the stun gun for easy grip. The lower part of the body of the stun gun has a rough texture that prevents the plastic from sliding in the hand.
A wrist strap is included as standard. Carrying the stun gun on a wrist belt will give additional confidence during operation: even if the device falls out of the hand in a stressful situation, it will not fall to the ground, and the enemy will not be able to easily take possession of the weapon and use it against the owner.
For the convenience of inserting the wrist strap loop into the stun gun, insert a thread into it and stretch the loop with it. The thread is thinner and easier to pass through the hole for the wrist strap.
STUN GUN AVATAR DK.111: CONTROLS
Convenient fuse. Removing the device from the fuse is carried out by shifting the fuse to the side. When the stun gun is removed from the fuse, the LED indicator displays the status of the battery.
The switch-on button of the electric shock arrester is made of silicone. The size of the button is 16x16 mm, convenient to press, does not allow the finger to slip when pressed.
The cartridge reset button allows you to quickly and conveniently discharge the stun gun. The button moves forward by a few millimeters, lowering the spring-loaded cartridge lock. Similarly, the protective cover of the combat electrodes is removed.
The buttons and the fuse are shifted with some effort, which helps to eliminate the possibility of accidental pressing.
SAFETY PRECAUTIONS DURING OPERATION AND USE OF STUN GUNS
A complete list of warnings is listed in the Operating Manual for the device. The most important points are listed below to ensure the safety of the operator and to avoid injury to the affected object.
- All operations for charging and discharging the ESU, installing and removing the protective cover should be performed with the device on the fuse!
- According to GOST R 50940–96 , the time of a single exposure should not exceed 3 s.
- It is strictly prohibited to use a stun gun against persons under the age of 16, pregnant women, persons with obvious signs of disability, as well as against persons with pronounced mental illnesses, except in cases of an attack that threatens the life and health of people.
- The use of a stun gun can lead to a loss of coordination, balance and a fall of the object of influence. This can cause serious physical injuries.
- It is forbidden to use the stun gun when using cartridges from a distance of less than 1m.
STUN GUN AVATAR DK.111. CONTACT USE
STUN GUN AVATAR DK.111 has sharp combat electrodes, the length is 8 mm. Sharp electrodes make it possible to achieve close contact with the object of exposure and increase the effectiveness of the use of the stun gun.
The electroshock effect on the target neutralizes the enemy within a few seconds, giving the owner of the weapon enough time to be safe, to call the police.
A protective cover for the combat electrodes is included as standard. The cover is installed on the front of the stun gun and is fixed by the cartridge lock.
The stun gun with the attached lid is convenient for operation: it does not cling and does not tear the fabric of pockets and bags.
You can use the stun gun in contact with the installed protective cover. In this case, the ASH must be pressed tightly against the object in order to prevent the electrodes from slipping and reducing the effectiveness of the impact.
STUN GUN AVATAR DK.111. REMOTE USE
To install the cartridge on the STUN GUN AVATAR DK.111, it is necessary to carefully insert the cartridge legs into the corresponding shafts located on the front of the stun gun.
Attach the cartridge with a forward motion until it clicks (locking the cartridge lock).
The cartridge for installation is symmetrical and is installed in the shafts of the stun gun in an arbitrary orientation (label up or label down).
To ensure the accuracy of the shot from the remote cartridge, there is an open sight in the form of longitudinal projections on the front of the case, coinciding with the aiming line.
